INSTALLATION INSTRUCTIONS FOR PART 99-9107B
APPLICATIONS
Audi A4 / S4
2002-2008
(With Symphony Radio)
99-9107B
KIT FEATURES
• DIN Head Unit Provision with Pocket
• ISO DIN Head Unit Provision with Pocket
• Double DIN Head Unit Provision
• Painted Matte Black to Match Factory
KIT COMPONENTS
• A) Radio Housing • B) Pocket • C) Trim Plate • D) ISO Brackets • E) Double DIN Trim Plate
• F) Double DIN Brackets
A
B
D
C
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-1787 - VW / Audi Harness 1993-up
Antenna Adapter:
• 40-VW10 - Euro Antenna Adapter 1986-up
F
E
TOOLS REQUIRED:
• (2) 86-9001 Head Unit Removal Tools • Small Flat Blade Screwdriver • Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2004-09 METRA ELECTRONICS CORPORATION
DASH DISASSEMBLY
99-9107B
AUDI A4 / S4 2002-2008 W/SYMPHONY RADIO
1
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
A
2
3
Insert Metra’s 86-9001 into the
slots in the factory head unit and
pull the unit out.
(Figure A)
CD
AS
LOAD
FM
MENU
TONE
AM
Disconnect the wiring.
SAT
TAPE
RDS
SCAN
1
KIT ASSEMBLY
99-9107B
DIN HEAD UNIT PROVISION WITH POCKET
A
B
C
Snap the DIN cage into the Radio
Housing and secure by bending
the metal locking tabs down.
(Figure A)
1
2
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
Snap radio assembly into factory
radio opening.
3
4
5
Slide the aftermarket radio into the
cage and secure. (Figure B)
Snap the pocket into the Radio
Housing until secure. (Figure C)
NOTE: Once the dash kit is snapped
in, it cannot be removed without
dash panel removal
2
KIT ASSEMBLY
99-9107B
ISO DIN HEAD UNIT PROVISION
Mount the ISO Brackets to the
head unit with the screws sup-
plied with the unit. (Figure A)
1
2
A
Slide the head unit into the radio
opening until the slide clips
engage. (Figure B)
Snap the ISO Trim Plate into the
Radio Housing. (Figure B)
3
Snap the pocket into the Radio
Housing. (Figure C)
4
5
B
Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-con-
nect the negative battery terminal
and test the unit for proper opera-
tion.
Snap the radio assembly into the
factory radio opening.
6
C
NOTE: Once the dash kit is snapped
in, it cannot be removed without
dash panel removal
3
KIT ASSEMBLY
99-9107B
DOUBLE DIN HEAD UNIT PROVISION
Cut and remove center divider
from radio housing. (Figure A)
1
2
A
Snap the DDIN brackets to the
inside edge of the radio housing.
(Figure B)
Slide the DDIN radio unit into the
DDIN bracket/radio housing
3
assembly and secure the unit to
the kit using the screws supplied
with the head unit. (Figure C)
Snap the DDIN trim-plate onto the
housing/radio assembly. (Figure C)
4
5
B
Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-con-
nect the negative battery terminal
and test the unit for proper opera-
tion.
Snap radio assembly into factory
6
radio opening.
C
NOTE: Once the dash kit is snapped
in, it cannot be removed without
dash panel removal
4
99-9107B
NOTES
5
99-9107B INSTRUCTIONS
1-800-221-0932
REV. 10/26/09
© COPYRIGHT 2004-09 METRA ELECTRONICS CORPORA TION
INST99-9107B
|
La Crosse Technology Clock WT 8005U User Manual
LeapFrog Games MIND MANIA SPELLING CLIP User Manual
Linksys Network Card HPES03 User Manual
Lowrance electronic Stud Sensor EP 15 User Manual
Makita Power Screwdriver 6802BV User Manual
Marantz DVD Player DV6200 User Manual
Marshall Amplification Car Amplifier JTM45 User Manual
Maxxsonics Portable Speaker NKF116 User Manual
Maytag Dishwasher W10438305A User Manual
Melissa Coffeemaker 245 030 040 User Manual